The high technology development promote the many industry step into faster update, the laser source technology upgrade a lot recent years, it make the laser marking machine industry become a hot industry. It has been widely used in various industries, and recognized as an innovative machinery that may completely replace the traditional marking processing mode. Today, we will analyze the laser service life of various laser marking machines, on the market There are more UV laser source, fiber laser source, CO2 laser source and so on.

The CYCJET UV laser marking machine is developed by 355nm UV laser source. The 355nm UV focusing spot is very small, which can greatly reduce the mechanical deformation of the material and the processing heat effect is small. The effective light output lifetime of the UV laser source is 12000 ~ 14000 hours. According to the average using power percent and working time, the UV laser is converted the effective working time range of laser is 2-3 years. Do you need to replace the UV laser after 2-3 years? The answer is No. the effective service life of the UV laser is 2-3 years, which does not mean that the equipment can not work at all. As long as the escape rate of the UV laser is ensured, the power attenuation is reduced, and the service life is extended, appropriate chiller should be equipped.

The service life of optical fiber laser marking machine is 100000 hours. Why is the service life of optical fiber laser printer longer than any other types laser? This is determined by the performance of the fiber laser itself. The electro-optical conversion rate of the fiber laser is more than 30%, which can greatly save power consumption, reduce operation cost, and send out high-quality laser beams, the laser source achieve the highest production efficiency. Moreover, its working substance is crystal, which can support long-term excitation. The laser oscillates in the fiber without thermal effect, Only air cooling is needed, no water tank is needed, and unlike gas laser, working gas needs to be replaced frequently, with less consumables; for different motors, when laser labels are widely used, the cost is low. High temperature resistance, wear resistance, anti-corrosion, waterproof, service life up to 10W hours, reasonable use, regular maintenance, use 7-8 years is no problem.

The CO2 laser source was filled CO2 gas in the tube, the discharge tube is filled with CO2, helium, nitrogen, hydrogen and xenon, mainly CO2, supplemented by others. Because there are many kinds of gases in the working chamber of the CO2 laser, which can be actually understood as a kind of consumable. The characteristics of CO2 laser are rich spectral lines. There are dozens of spectral lines in the vicinity of 10 μ M. the output speed of light has high optical quality, good coherence, narrow line width and stable operation. With high power and high energy conversion efficiency, the energy conversion efficiency can reach 30-40%, which is also higher than the general gas laser. The service life of CO2 laser is generally 20000 hours.

As mentioned above, any laser marking machine equipment needs our careful maintenance. No matter UV laser marking machine, Flying CO2 laser marking machine or optical fiber laser marking machine, as long as they are cleaned, cleaned and maintained regularly and correctly, the service life of the equipment will be extended accordingly.

CYCJET is a brand name of Shanghai Yuchang Industrial Company Limited. As a manufacturer, CYCJET have more than ten years’ experience for wholesaler and retailer of different types of handheld inkjet printing solution, Laser printing solution, portable marking solution in Shanghai China.

Contact Person: David Guo

Telephone: +86-21-59970419 ext 8008

MOB:+86-139 1763 1707(whatsapp)

Email: sales@cycjet.com

Keywords:

CYCJET UV laser marking machine

Flying CO2 laser marking machine

optical fiber laser printer

optical fiber laser marking machine

Video Link:

http://youtu.be/-ZWSDMR3LJ4 

https://youtu.be/ZQaJE4fgHK4